At present, some climbing vehicles on the market need to be upgraded to perform rock climbing, and the original 1/10 Night Crawler BND of Losi already has good climbing performance! Players only need to bind a DSM (2.4g) remote control device to immediately have a high-performance climbing vehicle! This product contains a lithium-ion battery, a dedicated electronic transmission with a preset climbing program, and a 540-55T high torque motor. Details are in this article. Specification: Type: Rock CrawlerScale: 1/10 (2.2) Length: 444.5mm (17.5 in) Width: 250.8mm (9.875 in) Wheelbase: 312.4mm (12.3 in) Weight: 1.9kg (4.18 lb) Chassis: Aluminum twin vertical plateSuspension: 4-linkTyre Type: 2.2 Losi Rock Claw tyresMotor or Engine: 55T / 540-sized motorSpeed Control: Losi MSC12L Fwd / Rev LiPo-compatible with crawler programmingRadio: Included Losi receiver with Spektrum 2.4GHz DSM technologyWheel Size: 2.2-inch beadlockKit / RTR: BNDShock Type: Adjustable 4-inch aluminium, coil-over, oil-filledBody: Pre-decorated Grappler ProFeatures:-The front and rear solid axle features a worm gear drive that acts as a brake when no power is supplied- The included ESC, with crawler-specific programming, accepts NiMH and LiPo batteries- All-metal CV front axle and centre driveshafts provide superior durability to the driveline to handle the stresses of rock crawling- The included Losi receiver with Spektrum 2.4GHz DSM technology means you ‘ll never have to worry about radio inte rference- The included front and rear LED light set comes pre-wired and mounted to the chassis- 4 ″ adjustable aluminium shocks provide durable, smooth operation and maximum suspension articulation without binding- The crawler features a low-centre-of-gravity battery tray design that allows for multiple battery types—from NiMH and LiPo “stick” packs to any of the 2.2-inch Losi LiPo crawler battery packs- The molded 4-link suspension setup minimizes rear axle swing and provides more precise handling- True 3-piece 2.2 beadlock chrome wheels, with 12mm hexes, hold the tyre bead in place and let you change tyres if needed—all without glue- National Champion 2.2 Los Mini Rc Crawler i Rock Claw tyres with foam inserts are constructed with Losi’s blue compound and have the characteristics, grip and traction to scale ev Team Associated Rc10 en the toughest courses- The direct-drive transmission provides an ultra-low gear ratio for rock crawling and metal outputs for durability- The twin vertical plate chassis is anodised red for a custom look- Zero Ackerman steering provides class leading performance with 45 degrees of steering throw- The competition-legal Grappler Pro body features realistic looks and added functionality Wall Remote Control Car Source: Horizon Hobby [horizonhobby.co.uk] \u0026 amp; Redrc.net
Product from Taiwan Team Ma Team Associated Rc10 gic (TM), SLS car Wall Remote Control Car shell, this car shell is specially designed by TM company for their ED4 RV series, but since this product is not authorized by Mercedes Tamiya Rc Cars -Benz, everyone ca n’t see the Mercedes-Benz logo ( (Replaced with TM logo), but the authenticity of the car shell is good, and the details can be handled well. Friends who like SLS can consider starting. Previously, this car shell needed to be sold with the E4D frame, but Japan has started to sell SLS car shells independently. It is estimated that this product can also be found in mainland China, which is suitable for various 1/10 electric RVs.
Weibo synced to adminTaiwan’s emerging brand CARTEN will launch the first-generation 4WD straight-shaft drive 1/10 RV M210 Mini (M car). It adopts composite fiber bottom plate, second floor plate and shock-absorbing bracket, and the battery compartment position supports various sizes of batteries. The hydraulic shock absorber uses a metal upper cover, a steel CVD drive shaft, an aluminum alloy darma seat, an aluminum alloy central drive shaft, and an aluminum alloy large tooth fixed seat. The factory-prepared suspension, differential, and tie rods are pre-installed, and the tires are optional by the player. Tooth difference kits will be launched simultaneously, metal upgrades will be launched simultaneously, so stay tuned.
Width 166mm, wheelbase 208-210mm, reduction ratio 2.353, gear ratio 5.46, tire diameter 55mm.Kyosho Kyosho launched the new Inferno GT 2 VE Race Spec 1/8 electric GT remote control car equipped with an Audi R8 body. Support up to 4S lithium batteries, using the powerful Team Orion Vortex 8 brushless motor and Vortex R8 electronic transmission. The remote control has been replaced with the new Syncro KT-331P. High-definition LCD display, anti-runaway, ABS and other functions are standard features of this remote control. High-torque KS-5031-09MW metal gear servo is also included in the product. As for the frame, a side protection plate is added, which can greatly improve the rigidity of the frame, and the long wheelbase frame makes the vehicle more stable. The car shell authorized by Audi is authorized to be spray-painted at the factory, part number 34102B.
In 1997, Hong Kong’s Xpress launched their first remote-controlled car, and the brand later ‘sold out.’ Entering 2016, Xpress announced that it will launch four new cars this year. It can be seen from the publicity map that they are all electric RV / M car products. Details Xpress will be announced one after another.
FID Racing Tomahawk Wheel This is a new attempt to break through the conventional fixing method. During this test, the test was performed using a strong hammer and pressing with the wheel. As a result, the Tomahawk wheel was Wall Remote Control Car only deformed and did not break. , Tomahawk wheel off-road best weapon
Click here- \u0026 gt; Enter the FID Racing brand zone to participate in the interaction
T.O.P. Racing launches a new aluminum flat car car stand with built-in small parts storage box, which saves space and serves both purposes. Suitable for 1/10 electric and oil rooms of various brands. Red and black are available for players to choose from.
T-Work ‘s launched a sponge front bumper, suitable f Tamiya Rc Cars or use with Mugen MTC1 electric touring car. This product has the same length as the front bumper of Mugen MTC1, uses hig Traxxas Race Car h-quality imported materials, weighs more than the original, increases the weight of the front end of the vehicle, and makes the turn faster. Product Numbers: TA-115-M.